Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bricked Device?
#51
Hi, I need help, i already tried many img but none of it working, previously i am updating by using twrp and i totally forgot which file. And my box cannot boot into recovery or bootloader, even factory reset also not working. SD card by Burn Card Maker also not working. Please help.

Chip "SKhynix, H27UCG8T2ATR", which pin should i short it, i tried shorten PIN 17+18, pc recognize but always fail at 2% with "[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error"

Thanks
Reply
IPVanish is probably the best VPN service to use in order to watch movies and TV shows anonymously on Kodi or otherwise. And, Xiaomi is gettting popular in the world.
#52
(06-28-2018, 11:56 AM)powerbuddy Wrote: Hi, I need help, i already tried many img but none of it working, previously i am updating by using twrp and i totally forgot which file. And my box cannot boot into recovery or bootloader, even factory reset also not working. SD card by Burn Card Maker also not working. Please help.

Chip "SKhynix, H27UCG8T2ATR", which pin should i short it, i tried shorten PIN 17+18, pc recognize but always fail at 2% with "[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error"

Thanks

Let's start from the basics...
What is your tv box with what chip and what Android version
And of course the reason of brick it!
From what you said , by the way, so far, maybe you tried with wrong firmware or something!
So more details please!
Reply
#53
(06-28-2018, 01:10 PM)gatos814 Wrote:
(06-28-2018, 11:56 AM)powerbuddy Wrote: Hi, I need help, i already tried many img but none of it working, previously i am updating by using twrp and i totally forgot which file. And my box cannot boot into recovery or bootloader, even factory reset also not working. SD card by Burn Card Maker also not working. Please help.

Chip "SKhynix, H27UCG8T2ATR", which pin should i short it, i tried shorten PIN 17+18, pc recognize but always fail at 2% with "[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error"

Thanks

Let's start from the basics...
What is your tv box with what chip and what Android version
And of course the reason of brick it!
From what you said , by the way, so far, maybe you tried with wrong firmware or something!
So more details please!


I am using OTT TV Box M8 Amlogic S802 Quad Core, i knew it's different from here, but the IC NAND Chip and trick seem similar with most android TV, i just flash it with some ZIP file through twrp, maybe it brick the recovery and bootloader and nothing work. I tried a lot of firmware with .img all not success, fail with logs;

[23:39:36 579][HUB1-4][Inf]--Failure : 3, FailureMax : 3
[23:39:36 625][HUB1-4][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[23:39:36 625][HUB1-4][Inf]--Close device handle 0x00000624
[23:39:37 546][Global][Inf]--Catch DBT_DEVICEARRIVAL
[23:39:37 546][Global][Inf]--Scan usb device
[23:39:37 546][Global][Inf]--Aml scan WorldCup Device
[23:39:37 546][Global][Inf]--Host: Renesas Electronics USB 3.0 Host Controller
[23:39:37 546][Global][Inf]--DevPath:\\?\pci#ven_1033&dev_0194&subsys_50071458&rev_03#4&1aa6ed88&0&0009#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[23:39:37 546][Global][Inf]---->Roothub:NUSB3#ROOT_HUB30#5&38bec2d2&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]-------->[Port0]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port2]Other device
[23:39:37 546][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&19459fff&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[23:39:37 546][Global][Inf]--Host: Intel® 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
[23:39:37 546][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1c26&subsys_50061458&rev_04#3&13c0b0c5&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[23:39:37 546][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&280fd44e&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2e96f335&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]---------->[Port0]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port2]Other device
[23:39:37 546][Global][Inf]---------->[Port3]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port4]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port5]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port6]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port7]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]--Host: Intel® 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
[23:39:37 546][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1c2d&subsys_50061458&rev_04#3&13c0b0c5&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[23:39:37 546][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&2d1c5194&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2133c676&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]---------->[Port0]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port2]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port3]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port4]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port5]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]--Scan USB host controller complete
[23:39:37 546][Global][Inf]--Update data center with HubMap

i already tried shorten "17+18" or "8+9", "29+30" all not working, fail flashing. Thanks

Sorry i don't have the picture, but i do manage to search for the image, same board "http://4pda.ru/forum/dl/post/9716537/m8.jpg"
Reply
#54
(06-28-2018, 03:48 PM)powerbuddy Wrote:
(06-28-2018, 01:10 PM)gatos814 Wrote:
(06-28-2018, 11:56 AM)powerbuddy Wrote: Hi, I need help, i already tried many img but none of it working, previously i am updating by using twrp and i totally forgot which file. And my box cannot boot into recovery or bootloader, even factory reset also not working. SD card by Burn Card Maker also not working. Please help.

Chip "SKhynix, H27UCG8T2ATR", which pin should i short it, i tried shorten PIN 17+18, pc recognize but always fail at 2% with "[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error"

Thanks

Let's start from the basics...
What is your tv box with what chip and what Android version
And of course the reason of brick it!
From what you said , by the way, so far, maybe you tried with wrong firmware or something!
So more details please!


I am using OTT TV Box M8 Amlogic S802 Quad Core, i knew it's different from here, but the IC NAND Chip and trick seem similar with most android TV, i just flash it with some ZIP file through twrp, maybe it brick the recovery and bootloader and nothing work. I tried a lot of firmware with .img  all not success, fail with logs;

[23:39:36 579][HUB1-4][Inf]--Failure : 3, FailureMax : 3
[23:39:36 625][HUB1-4][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[23:39:36 625][HUB1-4][Inf]--Close device handle 0x00000624
[23:39:37 546][Global][Inf]--Catch DBT_DEVICEARRIVAL
[23:39:37 546][Global][Inf]--Scan usb device
[23:39:37 546][Global][Inf]--Aml scan WorldCup Device
[23:39:37 546][Global][Inf]--Host: Renesas Electronics USB 3.0 Host Controller
[23:39:37 546][Global][Inf]--DevPath:\\?\pci#ven_1033&dev_0194&subsys_50071458&rev_03#4&1aa6ed88&0&0009#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[23:39:37 546][Global][Inf]---->Roothub:NUSB3#ROOT_HUB30#5&38bec2d2&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]-------->[Port0]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port2]Other device
[23:39:37 546][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&19459fff&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[23:39:37 546][Global][Inf]--Host: Intel® 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
[23:39:37 546][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1c26&subsys_50061458&rev_04#3&13c0b0c5&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[23:39:37 546][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&280fd44e&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2e96f335&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]---------->[Port0]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port2]Other device
[23:39:37 546][Global][Inf]---------->[Port3]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port4]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port5]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port6]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port7]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]--Host: Intel® 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
[23:39:37 546][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1c2d&subsys_50061458&rev_04#3&13c0b0c5&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[23:39:37 546][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&2d1c5194&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&2133c676&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[23:39:37 546][Global][Inf]---------->[Port0]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port2]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port3]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port4]NoDeviceConnected
[23:39:37 546][Global][Inf]---------->[Port5]NoDeviceConnected
[23:39:37 546][Global][Inf]-------->[Port1]NoDeviceConnected
[23:39:37 546][Global][Inf]--Scan USB host controller complete
[23:39:37 546][Global][Inf]--Update data center with HubMap

i already tried shorten "17+18" or "8+9", "29+30" all not working, fail flashing. Thanks

Sorry i don't have the picture, but i do manage to search for the image, same board "http://4pda.ru/forum/dl/post/9716537/m8.jpg"

The all thing here is to find the proper firmware to work!
You've lost bootloader and now nothing!
But from the time that your pc sees the tv box with the short pins trick the matter is to find the right firmware !
Just like that!
This was a common issue with ''old'' Amlogic tv boxes because there were too many clones with mixed ''componets'' !
Now after these years is hard to find the one!
Only the seller could helped you and i assume after so many years there is not that possibility !!!
So i'm afraid the news are not good!
Anyway i'll give you 2 more firmwares to test !
https://mega.nz/#!QYgzmRxb!vm-8cEzPBIoaE...0CRmoeAVUI
https://pan.baidu.com/s/1mgUd1pe
Good luck!
Reply
IPVanish is probably the best VPN service to use in order to watch movies and TV shows anonymously on Kodi or otherwise. And, Xiaomi is gettting popular in the world.
#55
Thank you and i will try it out.
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)
TV Box News