Thread Rating:
  • 3 Vote(s) - 4.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
image turns to purple an green
#1
HI there 
I have a nex A95X / S905X android 6, on my (old) sony bravia TV the screen truns to purple / green every 10 min is there a way to fix it ?
Reply
#2
(09-19-2016, 09:38 AM)sack Wrote: HI there 
I have a nex A95X / S905X android 6, on my (old) sony bravia TV the screen truns to purple / green every 10 min is there a way to fix it ?
Same on my old Philips (2009)

I'd like to fix
Reply
#3
I get the same with older TFT displays and a Samsung LCD TV when using the stock HDMI cable or any HDMI to DVI cable. It goes away when I swap to a high quality HDMI to HDMI cable.

Strangely it doesnt happen with all the stock HDMI cables, only about 25% of them based off my sample size of 40 A95X boxes (9 problem boxes). They are a mix of 1G/8G and 2G/16G. Unfortunately I unboxed them all at once and disposed of the packaging so I dont know if its 1G/8G or 2G/16G specific or a generic issue with both types.
Reply
#4
Hi, we are working on this problem. We will post the solution here when we fix this.
TVBoxNews.com, http://www.tvboxnews.com/
Reply
#5
(09-19-2016, 10:57 PM)botfap Wrote: I get the same with older TFT displays and a Samsung LCD TV when using the stock HDMI cable or any HDMI to DVI cable. It goes away when I swap to a high quality HDMI to HDMI cable.

Strangely it doesnt happen with all the stock HDMI cables, only about 25% of them based off my sample size of 40 A95X boxes (9 problem boxes). They are a mix of 1G/8G and 2G/16G. Unfortunately I unboxed them all at once and disposed of the packaging so I dont know if its 1G/8G or 2G/16G specific or a generic issue with both types.
The same problem when you use a LCD TV? Did it solve the problem after you change the HDMI?
TVBoxNews.com, http://www.tvboxnews.com/
Reply
#6
(09-20-2016, 02:41 AM)admin Wrote: The same problem when you use a LCD TV? Did it solve the problem after you change the HDMI?

Yes same problem with Samsung 32" LCD TV and yes changing the HDMI cable to a Belkin cable fixed it. I have ended up throwing away all the HDMI cables that came in the A95X box because 9 out of 40 of them dropped either blue or green from the RGB signal.

Also I have fully tested 40 boxes now and there was NOT a problem with the hardware on any of them. The problem is the HDMI cables shipped with the A95X. They seem to work with modern TV/LCD displays that support HDMI v2.0 or higher but the stock HDMI cable has problems with older HDMI v1.4 or earlier displays.
Reply
#7
But i have 3 different HDMI cables. One that came with A95X and two more.
All three works without problems with my TV /Philips 7404/H12/ and Rikomagic MK802IIIS but all with A95X they make green rosy screen with same TV.
I have and one HDMI splitter and I tried through but the problem remains.
Reply
#8
(09-20-2016, 06:58 PM)StoyanB Wrote: But i have 3 different HDMI cables. One that came with A95X and two more.
All three works without problems with my TV /Philips 7404/H12/ and Rikomagic MK802IIIS but all with A95X they make green rosy screen with same TV.
I have and one HDMI splitter and I tried through but the problem remains.

That sounds like a different issue to mine. You have MAYBE a hardware problem or HDMI port problem.

Can you try booting the LibreElec S905X image from SDCard and see if you have the same problem? If you do its a hardware problem, if you dont have the green screen with libreelec its a ROM isue.

Get from here:
http://www.memoryleaks.org/libreelec.tv/s905x/

You need the LibreELEC-S905X.aarch64-7.0.2.006.2.img.gz file
Reply
#9
(09-20-2016, 02:21 AM)admin Wrote: Hi, we are working on this problem. We will post the solution here when we fix this.

Hi thank you !!

It seems we have the same problem as this minix users http://www.minixforum.com/threads/solved...post-93742
they fixed the problem in android update and add the capability to force RGB output.

regards from France
Reply
#10
Friend, my A95X 2g16g not running any video or online or offline. It is a green screen and only hear the sound sometimes. I've tried to restore defaults, reinstalled the firmware 6.0.1 and nothing. I've tried other HDMI cables, changed television and nothing. Just try to run any type of video that it is so. Absurd. I am very disappointed with this product. What do I do?

Here's a video I made of the problem
https://drive.google.com/open?id=0ByDZPh...WRieUo4NEk
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
TVBoxNews.com