Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problems
#1
just bought a TV box and could not use it yet. When I turn on the device to HDMI input, initially appears as soon A95X and then is unsigned. I believe that is related to image resolution 1080P. How do I change the resolution or have access to the setup box tv?
Reply
#2
(09-04-2016, 04:15 PM)humbalex Wrote: just bought a TV box and could not use it yet. When I turn on the device to HDMI input, initially appears as soon A95X and then is unsigned. I believe that is related to image resolution 1080P. How do I change the resolution or have access to the setup box tv?
Not so clear about your problem. Is the screen showing nothing? what's the model of your box, A95x S905 or A95x S905x?
TVBoxNews.com, http://www.tvboxnews.com/
Reply
#3
(09-05-2016, 06:51 AM)admin Wrote:
(09-04-2016, 04:15 PM)humbalex Wrote: just bought a TV box and could not use it yet. When I turn on the device to HDMI input, initially appears as soon A95X and then is unsigned. I believe that is related to image resolution 1080P. How do I change the resolution or have access to the setup box tv?
Not so clear about your problem. Is the screen showing nothing? what's the model of your box, A95x S905 or A95x S905x?

My Box is A95X and the screen is NEXBOX A95X logo initial.
Reply
#4
IPTV Simple Client on NEXBOX A95X (S905, Android 5.1) doesn't work.

Good morning, I would like to get some help on using IPTV Simple Client. After configuring the WIFI I go in the panel:

System-> Settings-> Add-on-> My Add-on-> PVR Client-> PVR IPTV Simple Client.

I configure Remote Destination (Internet address);
I configure in the M3U playlist URL http://bit.ly/m3ubyinfogw string and confirm with ok.

Then I go online TV Settings-> General put in on the flag Enabled.

However when I do start Kode a popup tells me:

Add on could not be loaded. Check the log message for more information about this message.

The same procedure on Kodi on my pc it works properly.

Trying to enable another PVR Client show the same message.

Can you help, pointing what other tests can I do?
Reply
#5
(09-05-2016, 10:48 AM)humbalex Wrote:
(09-05-2016, 06:51 AM)admin Wrote:
(09-04-2016, 04:15 PM)humbalex Wrote: just bought a TV box and could not use it yet. When I turn on the device to HDMI input, initially appears as soon A95X and then is unsigned. I believe that is related to image resolution 1080P. How do I change the resolution or have access to the setup box tv?
Not so clear about your problem. Is the screen showing nothing? what's the model of your box, A95x S905 or A95x S905x?

My Box is A95X and the screen is NEXBOX A95X logo initial.

You need a firmware to upgrade. Give me the configuration information of your device, CPU? RAM&ROM? And your email?
TVBoxNews.com, http://www.tvboxnews.com/
Reply
#6
Hi guys i have a a95x and its been 3 months since ive had it. It started rebooting itself. Im stuck at nexbox a95x and would flicker a bit and reboot it self. Please help.
Reply
#7
(11-17-2016, 12:58 AM)Iggydpiggy Wrote: Hi guys i have a a95x and its been 3 months since ive had it. It started rebooting itself. Im stuck at nexbox a95x and would flicker a bit and reboot it self. Please help.
Use the firmware

A95X S905(1G+8G) firmware
https://mega.nz/#!YoA0HSJS!-k9mynyE-81ww...Dg9hU9yOgA
A95X S905(1G+8G) tool
SD
https://mega.nz/#!dhhU2b5D!2diP1TdDtbdE-...NoSORVms7U
USB
https://mega.nz/#!44AEnSCI!WFjmp9aMkQPb3...KEAihMOqrY
Reply
#8
(11-17-2016, 12:58 AM)Iggydpiggy Wrote: Hi guys i have a a95x and its been 3 months since ive had it. It started rebooting itself. Im stuck at nexbox a95x and would flicker a bit and reboot it self. Please help.

I saw a exactly same post on A95X S905 forum, and I replied a A95X S905 firmware. So which device do you actually have?
Reply
#9
Здравствуйте, недавно A95X приобрёл S905. При подключении блока питания, загорается красный индикатор, на пульт управления никак не реагирует. Пульт управления, блок питания, кабель проверил и разъем HDMI, всё в рабочем состоянии. При попытке прошивки через USB_Burning_Tool, программа выдаёт ошибку в процессе прошивки. Помогите пожалуйста. Видео с обзором проблемы https://m.youtube.com/watch?v=UtGfaY6XgH4.
Reply
#10
(12-08-2016, 11:01 AM)dimashanxai Wrote: Здравствуйте, недавно A95X приобрёл S905. При подключении блока питания, загорается красный индикатор, на пульт управления никак не реагирует. Пульт управления, блок питания, кабель проверил и разъем HDMI, всё в рабочем состоянии. При попытке прошивки через USB_Burning_Tool, программа выдаёт ошибку в процессе прошивки. Помогите пожалуйста. Видео с обзором проблемы https://m.youtube.com/watch?v=UtGfaY6XgH4.

Update firmware.
TVBoxNews.com, http://www.tvboxnews.com/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
TV Box News top 10 models mini pc news best tv boxes