Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware updating error
#1
Sad 
Has anyone ran into this error while trying to update firmware?

[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed

I have the correct firmware but cannot get past this error while trying to update via the latest USB burning tool.

The box is a Dolamee D9 s912 with 3gb Ram and 16gb ROM.
Reply
#2
Did you follow exactly this video?
https://youtu.be/4E8cYrwXC3Y
Also check to use usb 2.0 port and not 3.0 and also check and other usb ports!
One last thing ...
Download from here and install : http://www.tvboxforum.com/showthread.php?tid=6782
usb burning tool version v2.0.6.2 !
Good luck!
Reply
#3
(12-29-2017, 10:39 AM)gatos814 Wrote: Did you follow exactly this video?
https://youtu.be/4E8cYrwXC3Y
Also check to use usb 2.0 port and not 3.0 and also check and other usb ports!
One last thing ...
Download from here and install : http://www.tvboxforum.com/showthread.php?tid=6782
usb burning tool version v2.0.6.2 !
Good luck!

I did follow the video, but I used burning tool version 2.0.7.  Will that make a difference?
Reply
#4
I don't think so... but a test will give you the answer!
You must check again all the hardware and software odds (cable,ports,properly installed drivers maybe other pc....)!
Good luck!
Reply
#5
Do you happen to have a link for the exact firmware for this box? Maybe that's the issue?
Reply
#6
I don't have any other link except this one from the forum : https://mega.nz/#!4xpAABjD!CHbvq6km8KfEP...J1hUPub2sA
But if you want test and this one from A95X A2 : https://mega.nz/#!TUMxBaiD!Xa9ahafl02D85...DXEWizgdCM
I'm sure it's the same!
Good luck!
Reply
#7
Hello, someone could solve the error "[0x10103005] Romcode / Initialize DDR / Download buffer / Read failed item data" I am trying to load the firmware and the error appears

I'm doing it in the model
DOLAMEE D9 (3GB + 16GB)
Reply
#8
Did you go here : http://www.tvboxforum.com/showthread.php?tid=1197
and you followed,exactly the same?
Regards
Reply
#9
if I followed the steps of the manual but the error remains

log file of the Burning Tool application


[17:25:25 867][HUB4-5][Inf]--Start burning...

[17:25:25 929][HUB4-5][Inf]--------------ERASE BOOTLOADER------------

[17:25:25 929][HUB4-5][Inf]--2-2-0-0

[17:25:25 929][HUB4-5][Inf]-------------Download DDR.USB-----------

[17:25:25 929][HUB4-5][Inf]--Close device handle 0x000005c0

[17:25:25 991][HUB4-5][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&1f926af5&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000005c0

[17:25:26 054][HUB4-5][Inf]--2-2-0-0

[17:25:26 054][HUB4-5][Inf]--Control write pll reg1 0xd9000000:0x000000b1

[17:25:26 569][HUB4-5][Inf]--Control write pll reg1 0xd9000000:0x00005183

[17:25:27 077][HUB4-5][Inf]--Write initial succeed

[17:25:27 077][HUB4-5][Inf]--Upload encrypt at 0xc8100228

[17:25:27 077][HUB4-5][Inf]--ulValue = 0xbdfc31bc

[17:25:27 077][HUB4-5][Inf]--File change to DDR_ENC.USB

[17:25:27 077][HUB4-5][Inf]--Read encrypt value succeed

[17:25:27 077][Global][Err]--DDR_ENC.USB

[17:25:27 077][Global][Err]--DDR_ENC.USB

[17:25:27 077][HUB4-5][Err]--Read item data error, code -1

[17:25:27 077][Global][Err]--DDR_ENC.USB

[17:25:27 139][HUB4-5][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[17:25:27 139][HUB4-5][Inf]--Close device handle 0x000005c0


Attached Files Thumbnail(s)
       
Reply
#10
Try 6 more things:
1-Change usb cable (if it is possible)
2-Change usb port
3-Download again the firmware this time using a download manager
4-Try and with other versions usb burning tools
5-Use ''erase all'' on tool
6-Try and this similiar newer version of A2 and see what's happening! :  https://mega.nz/#!TUMxBaiD!Xa9ahafl02D85...DXEWizgdCM
Good luck!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
TV Box News