Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware updating error
#1
Sad 
Has anyone ran into this error while trying to update firmware?

[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed

I have the correct firmware but cannot get past this error while trying to update via the latest USB burning tool.

The box is a Dolamee D9 s912 with 3gb Ram and 16gb ROM.
Reply
#2
Did you follow exactly this video?
https://youtu.be/4E8cYrwXC3Y
Also check to use usb 2.0 port and not 3.0 and also check and other usb ports!
One last thing ...
Download from here and install : http://www.tvboxforum.com/showthread.php?tid=6782
usb burning tool version v2.0.6.2 !
Good luck!
Reply
#3
(12-29-2017, 10:39 AM)gatos814 Wrote: Did you follow exactly this video?
https://youtu.be/4E8cYrwXC3Y
Also check to use usb 2.0 port and not 3.0 and also check and other usb ports!
One last thing ...
Download from here and install : http://www.tvboxforum.com/showthread.php?tid=6782
usb burning tool version v2.0.6.2 !
Good luck!

I did follow the video, but I used burning tool version 2.0.7.  Will that make a difference?
Reply
#4
I don't think so... but a test will give you the answer!
You must check again all the hardware and software odds (cable,ports,properly installed drivers maybe other pc....)!
Good luck!
Reply
#5
Do you happen to have a link for the exact firmware for this box? Maybe that's the issue?
Reply
#6
I don't have any other link except this one from the forum : https://mega.nz/#!4xpAABjD!CHbvq6km8KfEP...J1hUPub2sA
But if you want test and this one from A95X A2 : https://mega.nz/#!TUMxBaiD!Xa9ahafl02D85...DXEWizgdCM
I'm sure it's the same!
Good luck!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
TV Box News